Description
VIP HM PRESSURE EQUIPMENT
The single-phase domestic pressure boosters of the PRES VIP HM series are for decanting clean water, without additives, which can damage the materials of the equipment,
They consist of a horizontal VIP H pump with stainless steel impellers (AISI 304) and a control system mounted directly on the pump drive, which automatically starts and stops, ensuring correct operation of the installation.
The most important features are :
– Silent pressure equipment
– Joint design of all equipment, ready for automatic operation
– Modular construction configurable according to the required equipment
– The PRES VIP HM equipment is defined in the selection table according to the required flow rate and head.
– The power varies from 0,55 to 1,5 Kw, the flow 0,9 to 9 m3/h and from height 20 to 68,5 m.c.a.
– Maximum operating pressure 12 bar.
– Maximum liquid temperature 50ºC
- For domestic, industrial and agricultural supplies.
- Gardening
- Drip irrigation.
- Water distribution from a tank
- Water supply to networks without sufficient pressure
- Fire fighting equipment
- Small hydraulic applications
- Factories
- Shops, markets and shopping centres
- Hotels
- Laboratories
- Offices in general, banking, governmental, of attention to the public
Depending on the project requirements of the installation itself, different configurations can be distinguished:
PRES VIP HM /24 Composed by:
*Pump VIP H Monophasic . With threaded suction and discharge flanges, radial type steel impellers (AISI 304), graphite/ceramic mechanical seal, suction and discharge body in GG-25, diffusers in glass fibre reinforced noryl, in monobloc configuration and stainless steel shaft motor.
* 5-way connector. The 5-way fitting is the backbone of the pressure equipment installation, it is the element that joins all the elements, allowing a correct operation all at the same time, it has 5 ways to be able to install in each one of them a different device.
* Calderín 24 liters. Vertical made of welded galvanized steel, built according to the European directive 97/23/CE of pressure equipment, made according to homologated procedures, able to resist the working pressure loosely.
* Pressure gauge up to 5 Bar: Pressure gauges are used to see the water pressure inside the pipe in an installation, capable of withstanding a maximum pressure of 5 bar.
* Pressure switch 0-5 BAR Single-phase: The pressure switch pressure is perfect for the pressures that will handle the pressure equipment, closes when the pressure drops and opens when it rises.
PRES VIP HM/50 Composed by:
*Pump VIP H Monophasic . With threaded suction and discharge flanges, radial type steel impellers (AISI 304), graphite/ceramic mechanical seal, suction and discharge body in GG-25, diffusers in glass fibre reinforced noryl, in monobloc configuration and stainless steel shaft motor.
* 5-way connector. The 5-way fitting is the backbone of the pressure equipment installation, it is the element that joins all the elements, allowing a correct operation all at the same time, it has 5 ways to be able to install in each one of them a different device.
* Boiler 50 liters. Horizontal made of welded galvanized steel, built according to the European directive 97/23/CE of pressure equipment, made according to homologated procedures, able to resist the working pressure loosely.
* Pressure gauge up to 5 Bar: Pressure gauges are used to see the water pressure inside the pipe in an installation, capable of withstanding a maximum pressure of 5 bar.
* Pressure switch 0-5 BAR Single-phase: The pressure switch pressure is perfect for the pressures that will handle the pressure equipment, closes when the pressure drops and opens when it rises.
PRES VIP M/FL Composed of:
*Pump VIP H Monophasic . With threaded suction and discharge flanges, radial type steel impellers (AISI 304), graphite/ceramic mechanical seal, suction and discharge body in GG-25, diffusers in glass fibre reinforced noryl, in monobloc configuration and stainless steel shaft motor.
*FLUMATIC 230V Pressure Controller: Controls the equipment, starting and stopping the pump according to the pressure in the pipe. It incorporates a manometer to observe that it starts when the pressure drops below 2 bars and stops automatically when the pump reaches the maximum pressure it can deliver, stabilizing the water circuit.
Call us
Send us an Email
